Understanding Land Patterns vs Footprints Differences in PCB

Introduction

When it comes to PCB design, it is important to distinguish the concepts of land patterns and footprints if one is to deliver good functional circuits. Although these two are closely interrelated, they play two different roles in assembly / manufacturing cycle. How they work, and how to get them right is what we are going to discuss in this blog.

Relationship Between Footprints vs Land Patterns

PCB footprints vs land patterns both relate to the same component. The catch is they serve different purposes. The footprint gives you the part’s placement for assembly. The land pattern shows how it connects during manufacturing. PCB footprints is to plan space and wiring. The land pattern defines the pads and traces needed for the component. These should work together to manufacture a good PCB.

Land Patterns vs Footprints
Land Patterns vs Footprints

What is a Land Pattern in PCB Manufacturing?

A land pattern in PCB manufacturing connects the component to the PCB physically and electrically. It aligns with the leads of the component accordingly to appropriately fit. As with most other designs, it is only a little larger than the component’s foot print to accommodate for soldering. It also complies to size of solder balls and can also handle slight variation in size of the components. This also takes into account the fabrication tolerances on the manufacturing and assembly of PCBs and the required characteristics of the solder fillets.

Land Pattern in PCB Manufacturing
Land Pattern in PCB Manufacturing

A good PCB Land Pattern has:

Contact Pads

These are small conducting regions on your PCB that interconnect parts. They can also function as bridge between component leads and the board. They are made from metals such as copper, gold or aluminum etc. In addition, they avoid short circuiting and enable neat connection of other parts onto the board.

Traces

These are the interconnecting and inter wakes that are usually depicted on your PCB as thin copper stripes. They behave like conduits to transmit electrical signals from one component such as ICs or resistors or capacitors. Designed to take the necessary current and maintain minimal resistance. Components wouldn’t communicate or function together without traces.

Thermal Relief

This reliefs assist in the reduction of heat during the soldering process. These are spoked connections that join pads to bigger copper areas or planes. They regulate heat and limits dispersion of heat to the immediate environment.

Mechanical Layers

These layers provides detailed information about your PCB’s physical design. It should include the exact board outline, dimensions, and any cut-outs or slots required to manufacture the PCB. These layers are essential for guiding fabrication.

Fiducials & Tooling Holes

Critical for aligning your PCB during manufacturing. Fiducials serve as visual reference points for machines, while tooling holes keep the board secure during fabrication. These checks that drilling to soldering processes are precise.

What is a Footprint in PCB Assembly?

A PCB footprint is a map that helps you place components on a circuit board. It shows the exact size and shape of the part and where it fits. Think of it like pressing your foot into soft sand—the imprint left behind is like the footprint. It includes pads for attaching components, whether surface-mount (SMD) or through-hole types. This ensures everything lines up perfectly for both attachment and electrical connections.

Footprint in PCB Assembly
Footprint in PCB Assembly

A good PCB footprint has:

Refdes

A reference designator (RefDes) is essentially a name that you assign for your PCB component. It uses lettering and numbering to name parts such as resistors or capacitors. RefDes enables you to easily locate parts during use or even during the design or during the time of assembly.

Body Outline

Defines your PCB’s shape and exact dimensions. It should include the edges, corners, cutouts, and slots of your PCB. This outline acts as a template for PCB fabrication and assembly.

Pin Location Holes

These are the spots where components are mounted. Soldering of resistors, ICs etc is done here where they are inserted into small holes which hold them tightly. In addition, they bridge the first and last layers of an PCB layout or one or more intermediate layers in multi-layer PCB. Pin location holes come in two types: plated for electrical connections and non-plated for screws or positioning.

Assembly Information

Includes all the details needed to assemble your PCB. It covers assembly drawings, a bill of materials (BOM), and specific assembly notes. It guides the placement of components and accurate assembly.

Courtyard

The courtyard is a virtual area around each component on your PCB. Defines the minimum clearance needed between components. It is needed so there’s no overlap during placement or assembly. Proper courtyard design helps prevent fitting issues and keeps your PCB neat and functional.

How Do We Distinguish Between Land Pattern and Footprint?

In PCB assembly practice, the terms footprint and land pattern may seem to be the same but they are not. A footprint means an arrangement of pads or holes of a component connector. It comprehends the position, size, and positioning of the component on the printed circuit board. A land pattern, therefore, is a measure of the size of the pads themselves. These pads are the copper areas to which the component is mechanically and electrically soldered. Footprints guide you on the positioning of components, and the land patterns guide on soldering and interconnecting.

How to Design Correct PCB Footprints

We first create the pads, define component height and area, number of layers, outline, component keepout region, pitch of the component, and finally attach it to the schematic.

  • Avoid Hole in a Pad – Don’t place mounting holes inside an SMD pad. It can interfere with soldering process. It may cause vias to be unsolderable.
  • Check For Zero Component Orientation – Zero-component orientation tells you how to rotate the component. You should follow IPC standards for proper orientation.
  • Follow IPC Zero Orientation – This helps to correct component placement. This standard is critical for automated pick and place machines. For accurate rotation and correct connections.
  • Include Pin 1 Indicators – Pin 1 indicators help correctly orient your components. This is for the pins to connect to the right pads. It prevents mistakes during assembly.
  • Pad Size and Shape – You have to make sure the pads are the same size and shape. Consistent pad size ensures the component sits properly. This is to prevent alignment problems.
  • Solder Paste Amount – You have to use the right amount of solder paste between pads. Too much paste can cause bridging; too little can cause weak joints.
  • Symmetry – You have to make sure the pads are symmetric on the PCB. This prevents issues like tombstoning, where components lift off the pads.
Footprint
Footprint

How to Design a Good Land Pattern?

  • Define Placement Courtyards – A placement courtyard is the area around a component so it has enough space for assembly. Courtyards help avoid collisions between components.
  • Follow IPC-7351 Guidelines for Land Size – IPC-7351 guidelines help calculate proper land size for components. These guidelines ensure pads are correctly sized.
  • Mark Pin 1 Clearly – Marking Pin 1 is important for correct component orientation. It ensures the component fits in the right direction. This helps both manual and machine assembly.
  • Optimize Assembly and Silkscreen Outlines – Assembly and silkscreen outlines define the component’s placement. They are guides for placement during assembly. They also make inspection easier.
  • Place Reference Designators Strategically – Reference designators are labels for each component. Place them where they’re easy to see and identify. These matches the components on the board with the schematic.
  • Paste Mask and 1:1 Scale – A paste mask controls how solder paste is applied. Use a 1:1 scale to ensure the right amount of paste. Prevents bridging and soldering issues.
  • Protect Traces with a Solder Mask – Solder mask protects traces from soldering it accidentally. It prevents solder from touching the wrong areas. These are used for clean, reliable connections.
  • Reduce Paste on Thermal Pads – Thermal pads need less solder paste. Too much paste can be a cause of soldering issues. Reduce the paste for good thermal connections.
  • Proper Land-to-Land Gap and Silk-to-Land Gap – The land-to-land gap ensures enough space for soldering. If it’s too small, soldering will be tricky. The silk-to-land gap avoids problems with the soldermask.
  • Use a 1:1 Scale Paste Mask – A 1:1 scale paste mask ensures proper solder paste placement. This helps control the amount of solder paste used.
Land Pattern
Land Pattern

IPC-7351 Standard for Land Patterns vs Footprints

The IPC-7351 standard also assists drill in achieving accurate land patterns for PCBs. It focuses on three key measurements: The third dimension is known as pad width X, pad spacing G, and the end to end pad dimension is Z. These dimensions are relevant in positioning of components appropriately. In calculating them, you also require another variable, which is the pitch (P) between the component’s leads.

The standard also provides tolerances on these dimensions. For instance, lead width W, and lead to lead distance L also requires proper consideration. Solder fillet size depends on the conditions of the some materials that change depending on the design of the component.

FAQs

  • Can You Update Just the Footprint or Just the Land Pattern Independently?

It is possible to change either the shape of the footing or the land layout individually if so desired. But it should be noted that these changes should continue to keep a good working relationship between the two. For instance, if they are not well synchronized; then one may find it hard to place all the components correctly; or one might have a challenge when soldering the PCB. This is because typically the footprint and the accompanying land pattern should be revised in tandem to avoid such disparities and optimize the production flow.

  • Should Land Patterns Match the Typical or The Maximum Part Footprint Dimension?

When making the land pattern, it is usually advised that they should match the size of the component. This is because this sizing assists in positioning during soldering as the solder melts by filling a given dimension. The decision of whether to use the conventional (nominal) size or maximum size for the land pattern is well addressed by the manufacturer or by following IPC guidelines. It depends on the trade off like heat dissipation, components orientation and possibility of shorting out the line. In most designs, the size differences between the two will not greatly matter, because board fabrication tolerances are typically 0.1mm.

  • What is the Land Pattern/PCB Footprint for the EPC23101?

For EPC23101, you can find the Altium library here: EPC Altium Library. For its Evaluation Board Gerbers, you can access the evaluation board details here: EPC90142 Evaluation Board and the Gerber files here: EPC90142 Gerbers. If you’re using KiCad, you can download it here: EPC KiCad Library.

  • Can Footprints vs Land Patterns Be Synchronized After Creation?

Yes, after creation, if the footprint and land pattern gets out of synchronization then for their synchronization there is a tool available in market named Altium. You can use these tools to accumulate your design or identify differences between the footprint and the land pattern. Ideally, these two should be set from the onset in order to avoid inconveniences along the way into the design and management of the library.

Conclusion

In this PCBMay blog, we looked the differences between land patterns and footprints on PCBs. Both were involved in component placement and connection but in assembly and manufacturing, they were differently used. We compared why IPC-7351 should be followed, directions on how the land patterns and footprints should be designed correctly.

Scroll to Top

Get a Quick Quote!

x
Upload File

Get a Quick Quote!

x
Upload File